0 $0.00
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
Search & Filter
229 items found
Sort by
Intersystem grounding bridge, has 4 termination points, one more than required by the NEC. Cable range 4 termination points for #4 to #14 solid or stranded. Ataches to grounding conductor with lay in style lug with a cable range of #6 to #2 grounding wire
Zinc die-cast, 1/2" Knockout MC cable connector snaps quickly on to the conduit with an internal spring steel clip and then snaps into knockout with an external spring steel clip, no tools required. Concrete tight when taped. Provided with insulated throa
Plastic, 1/2" knockout size Push-in connector snaps into knockout using light finger pressure, holds wires securely and is simple to remove with the twist of a screw driver.
Box Extender, levels and supports the wiring device where the box is set back from the wall surface extends the box up to an 1-1/2. 2 hour fire rating. Single Gang.
Zinc die-cast, 1/2" knockout, screw saddle type "Take All" connector for steel and aluminum jacketed cables. Provided with insulated throat. Rectangular end stop. Secures into knockout with locknut.
Bare wire ground clamp zinc die cast. Pipe size 1/2" to 1", Wire range #8 to #2.
ceiling box cover, non-metallic, paintable. Covers unused 3-1/2 and 4" round and octaganal boxes prior to the installation of a fan or fixture. Mounting screws are invisible on the ceiling. two #8/32 x 3-1/4 bracket are included.
L-shaped fan and fixture mounting box. 70lb fan, 200lb fixture rated for 1/2" or 5/8" drywall. 13.4 cu. 2 Hour Fire Rating.
Low profile Inbox for new vinyl siding construction. Horizontal with weatherproof while in use Extra Duty clear cover.
Low-profile non-metallic, liquid-tight, oil-tight, and gray strain relief cord connector furnished with a sealing ring and locknut. Supports .385 to .750 cord range with a 3/4 inch trade size.
Low Voltage mounting bracket, single gang for installation on existing construction for class 2 wiring only.
Non-Metallic box for new construction. Adjustable for wall thicknessess from 1/4" to 1-1/2". Single Gang, Vertical, 21.0 cu.
Non Metallic adjustable floor box. Brown with flip lids. Includes tamper resistant duplex receptacle, cover plate with gasket and Arlington NM94 connector and Arlington NM900 knockout plug.
Zinc die-cast, 1/2" Knockout MC cable connector snaps quickly on to the conduit with a removable screw in spring steel clip and then snaps into knockout with external spring steel clip, no tools required. Concrete tight when taped. Comes with Insulated th
Duplex zinc die-cast, 3/8" Knockout MC cable connector snaps quickly on to the conduit with an internal spring steel clip and then snaps into knockout with an external spring steel clip, no tools required. Concrete tight when taped. Provided with insulate
Box Extender, levels and supports the wiring device where the box is set back from the wall surface extends the box up to an 1-1/2. 2 hour fire rating. two gang.
Zinc die-cast, 1/2" Knockout MC cable connector snaps quickly on to the conduit with a removable screw in spring steel clip and then snaps into knockout with external spring steel clip, no tools required. Concrete tight when taped. Red tinted internal cli
Plastic, 3/4" knockout size Push-in connector snaps into knockout using light finger pressure, holds wires securely and is simple to remove with the twist of a screw driver.
One Box Non-Metallic outlet boxes. Single Gang. Vertical. 22.5 cu.
Meter mounting base 1 piece construction paintable, gangable, UV Rated. Provides a 1" overhang to cover siding. For all siding types. Dimensions 18,16.
Floor box kit with steel box and metallic cover with threaded plugs. Single Gang. Nickel.
Low-profile non-metallic, liquid-tight, oil-tight, and gray strain relief cord connector furnished with a sealing ring and locknut. Supports .200 to .472 cord range with a 1/2 inch trade size.
PVC Entrance cap for rigid, IMC, EMT, Rigid PVC. Trade Size 2". Mast Size 2". Wire Holes two at .750 and one at .562.
1/2" All Plastic snap-in type for knockouts.
Zinc die-cast, 1/2" Knockout MC cable connector snaps quickly on to the conduit with an internal spring steel clip and then snaps into knockout with external spring steel clip, no tools required. Concrete tight when taped. Red tinted internal clip indicat
Fan and fixture mounting box for new construction. Fits catheadral ceilings up to 80 degrees or larger. 70lb, 200lb fixture. Paintable textured finish. 14.5 cu. 8" square mounting surface handles fans with larger canopies.
Non-Metallic box for new construction. Adjustable for wall thicknessess from 1/4" to 1-1/2". Two Gang, Vertical, 43.5 cu.
One Box Non-Metallic outlet boxes. Two Gang. Vertical. 41.3 cu.
Low-profile non-metallic, liquid-tight, oil-tight, and gray strain relief cord connector furnished with a sealing ring and locknut. Supports .385 to .600 cord range with a 1/2 inch trade size.
Zinc die-cast, liquid-tight, and oil-tight strain relief cord connector furnished with a sealing ring and locknut. Supports .875 to 1.000 cord range with a 1 inch trade size.
Solid Bronze with stainless steel screws, bare wire ground clamp with lay-in lug. pipe size - 3/8" to 1", Wire Size - #10 to #2. Approved for direct burial on rebar pipe, tubing and rod.
3/4" All Plastic snap-in type for knockouts.
Steel EMT compression connector. concrete tight and rain tight. Trade Size 3/4".
Cast aluminum roof flashing, Trade Size 2". Includes set screw to secure pipe and compound.
Intersystem grounding bridge, has 4 termination points, one more than required by the NEC. Cable range 4 termination points for #4 to #14 solid or stranded. Ataches to grounding conductor with lay in style lug with a cable range of #6 to #2 grounding wire
Non Metallic screw on straight liquid tight connector for liquid tight conduit type B only. Trade Size 3/4".
Loading more
Total 229 products
SEARCH ×

This site is being monitored by one or more third-party monitoring software(s), and may capture information about your visit that will help us improve the quality of our service. You may opt-out from the data that https://smartpixl.com is collecting on your visit through a universal consumer options page located at https://smartpixl.com/Unsub/unsub.html