0 $0.00
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
Search & Filter

Conduit Fittings - PVC & Nonmetalic

165 items found
Sort by
PVC FITTINGS, 78366, Reducer Bushing, 3 in × 2-1/2 in, Schedule 40 PVC, Bell to Spigot, Gray
PVC FITTINGS, 78330, Expansion Joint, 1 in nominal size, PVC, Slip × Slip
PVC FITTINGS, 78331, Expansion Joint, 1-1/4 in, PVC, Two-Piece Coupling
PVC FITTINGS, 78351, Offset Terminal Adapter, 1-1/4 in, High-Impact PVC, Gray, Approx. 4.24 in
PVC FITTINGS, 78561, Elbow, 4 in; Schedule 40, Plain-end, PVC, 45° Bend
PVC FITTINGS, 78555, Elbow, 1-1/4 in, 45° Standard-Radius, High-impact PVC, Plain-end Connection
Bridgeport Fittings, 433-NMLT, Liquid Tight Connector, 1-1/4 in, Nylon, UL Listed, NEMA FB-1
PVC FITTINGS, 78293, End Bell, 2 in; PVC, For Rigid Conduit Systems
Bridgeport Fittings, 471-NMLT, 90-Degree Connector, 3/4 in, Nylon, NEMA FB-1, Outdoor Use
PVC Entrance cap for rigid, IMC, EMT, Rigid PVC. Trade Size 1/2", 3/4" and 1". Mast size 1/2", 3/4" and 1". Wire Holes two at .673.
Non Metallic 90 degree screw on straight liquid tight connector for liquid tight conduit type B only. Trade Size 3/4".
PVC FITTINGS, 78009, Coupling, 3-1/2 in, PVC, Slip × Slip, Schedule 40; Schedule 80
Non Metallic screw on straight liquid tight connector for liquid tight conduit type B only. Trade Size 3/4".
Insulating EMT Bushing, 1-1/4", Polyethylene for Low Volt Wiring
PVC FITTINGS, 78070, Female Adapter, ½ inch (female thread), High-impact PVC, Schedule 40/80 compatible, Gray
Zinc die-cast, liquid-tight, and oil-tight strain relief cord connector furnished with a sealing ring and locknut. Supports .875 to 1.000 cord range with a 1 inch trade size.
1-1/4" All Plastic snap-in type for knockouts.
3/4" All Plastic snap-in type for knockouts.
box cover. Covers 4 inch round or octaganal boxes paintable, reusable. Comes with white painted screws to blend with cover.
1" All Plastic snap-in type for knockouts.
Zinc die-cast, liquid-tight, and oil-tight strain relief cord connector furnished with a sealing ring and locknut. Supports .750 to .875 cord range with a 1 inch trade size.
Strut Clip for conduit on Arlingtons non metallic quicklatch pipe hangers. For 3/4" Liquid Tight, 3/4" Flex, 3/4" ENT, 3/4" Copper Pipe.
Strut Clip for conduit on Arlingtons non metallic quicklatch pipe hangers. For 2" Rigid, 2" EMT, 2" Liquid Tight, 2" Flex and 2" Copper Pipe.
Non-metallic bushing snaps into standard knockout and fixes into common hole configurations for 2 x 4 metal studs, sold in a quantity of 500.
Insulating EMT Bushing, 1-1/2", Polyethylene for Low Volt Wiring
Insulating EMT Bushing, 4", Polyethylene for Low Voltage Wiring
Insulating EMT Bushing, 3", Polyethylene for Low Volt Wiring
Bridgeport Fittings, 329, Plastic Bushing, 3-1/2 in, 105°C Heat Rating, Gray
PVC FITTINGS, 78295, End-Bell Fitting, 3 in Conduit Size, Rigid PVC, Schedule 40
PVC Fittings, 78319, End Cap, 2 in, PVC, Solid Cap, Solvent-Weld
PVC FITTINGS, 78074, Female Adapter, 1-1/2 in, High-impact PVC, Threaded Hub, Schedule 40/80
PVC FITTINGS, 178109, Pipe Strap, 2-Hole, 3 in
PVC FITTINGS, 78092, Terminal Adapter, 3-1/2 in, Male-Threaded, High-Impact PVC, UL Listed
PVC Fittings, 78079, Female Adapter, 4 in (female thread), High-Impact PVC, Gray, Schedule 40/80
PVC FITTINGS, 68766, Elbow, 2-1/2 in, 90° Degree, High-impact PVC, Schedule 40, 36 in Bend Radius, UL 514B/514C Certified
PVC FITTINGS, 78353, Reducing Bushing, ¾ in x ½ in, High-impact PVC, Bell to Spigot, Gray
Loading more
Total 165 products
SEARCH ×

This site is being monitored by one or more third-party monitoring software(s), and may capture information about your visit that will help us improve the quality of our service. You may opt-out from the data that https://smartpixl.com is collecting on your visit through a universal consumer options page located at https://smartpixl.com/Unsub/unsub.html